Super Sale!

Select Trailers on sale now!

View Sale
Are Royal Cargo trailers any good?2024-01-30T17:22:34-08:00

Royal Cargo trailers are great trailers. Royal Cargo Trailers is a brand of the Southland Trailer Corp and uses their same manufacturing processes and commitment to quality, such as:
• Engineered frames that reduce cross members – which reduce trailer weight, and increase payloads
• Aluminum toolboxes – which reduce trailer weight, and increase payloads
• Robotic welds for quality and consistency
• Fully enclosed wiring
Watch this quick video example of Royal Cargo toughness: video

How much does a Southland dump trailer weigh?2024-01-30T17:21:29-08:00

It depends on the model. The most popular SL270 7×14 14K weighs 3,123 pounds and has an impressive 12,277 pound payload. While the SL 5×10 5K weighs 2,379 pounds and has a similarly impressive 3,341 pound payload. Go to our Southland Brand Page and select your specific model – you will find the weight, GVWR, payload and other specifications for your Southland Dump Trailer or Royal Cargo Trailer.

Is Southland a good trailer brand?2024-01-30T17:20:28-08:00

Southland Trailer Corp is the largest trailer manufacturer in Canada and for good reason. Southland Trailer Corp is family owned and family operated having started 50-ish years ago in the family garage. They are dedicated to innovation and committed to quality. Indeed, Southland is a great trailer brand. To learn more about Southland Trailer Corp, visit our Southland Brand Page. Each Southland trailer is built with thoughtfulnesss:
• Engineered frames that reduce cross members – which reduce trailer weight, and increase payloads
• Aluminum toolboxes – which reduce trailer weight, and increase payloads
• Robotic welds for quality and consistency
• Fully enclosed wiring

How do I repair a dump trailer remote?2024-01-22T15:53:49-08:00

Did you remote button stop working? Or your remote button is working intermittently?

Before you tow your trailer to us, try following this video troubleshooting tutorial.

It is specific to the common KTI Hydraulics Wired Pendant Remote and is useful for 2-button, 4-button, and optional LED Screens. When your KTI pump control is not working, follow these easy steps to clean the contacts, clean the connections, or disconnect the LED.

What are common trailer wheel lug nuts?2024-01-20T09:03:55-08:00

Flanged Lug Nuts:

  • Design: Flanged lug nuts have a flat, wide surface at the base, which acts as a built-in washer. This flange is typically larger in diameter than the nut itself.
  • Purpose: The flange provides a larger surface area to distribute the clamping force over a greater area of the wheel. This helps in maintaining the wheel’s alignment and reduces the chance of the nut loosening.
  • Application: These are often used in heavier vehicles or trailers where a more secure fit is necessary due to the higher loads. The flange helps to evenly distribute the pressure and reduce wear on the wheel.

Coned (Conical) Lug Nuts:

  • Design: Coned lug nuts have a tapered base, usually at a 60-degree angle. This taper fits into a matching conical seat in the wheel.
  • Purpose: The conical design centers the nut on the wheel for a precise fit. As the nut is tightened, the conical base is pulled into the seat, ensuring a snug and centered fit.
  • Application: Coned lug nuts are common in passenger vehicles. The conical shape provides an even distribution of pressure while ensuring the wheel is accurately positioned on the hub.

The choice between flanged and coned lug nuts depends on the wheel design and the specific requirements of the vehicle. It’s crucial to use the type of lug nut that matches the wheel design for safety and proper wheel function. Using the incorrect type can lead to wheel misalignment, uneven wear, and potentially hazardous situations.

What is a Hub Pilot wheel?2024-01-19T15:45:22-08:00

A Hub Pilot wheel, sometimes called a Hub-Centric wheel, is a design where the bore of the wheel precisely matches the axle hub and shares the load with the lug nuts – ideally the entire weight of the trailer is supported by the hub and the lug nuts are dedicated to securing the wheel to the hub.  This precise fit and load sharing reduces vibration and improves handling.  You’ll find these on trailers engineered for heavy loads.

What is bolt pattern? What does 655 BC mean?2024-01-20T08:38:47-08:00

A wheel’s bolt pattern is a notation indicating the number of bolts and their layout on the wheel.  For example, 655 BC (or sometimes 6×5.5 or 6×5.5”) indicates 6 bolts on a 5.5” diameter circle (an imaginary circle through the center of each bolt hole.  There are several bolt patterns so make sure you find the right wheel to fit on your axle.  Other common bolt patterns for utility trailers include 545 BC and 865 BC.

When mounting a new tire, what is the proper torque pattern or lug nut sequence?2024-01-20T08:37:31-08:00

Follow the appropriate illustration:

  1. Start lug nuts by hand to avoid cross-threading
  2. Tighten lug nuts in the illustrated sequence following the appropriate torque stages and Torque Specifications
  3. Did we already say to check your torque frequently?

What are the lug nut torque specifications for my trailer? Why do I need to constantly torque and retorque the lug nuts on my trailer?2024-01-20T08:39:41-08:00

It is critically important to properly torque and retorque the lug nuts on your trailer, particularly when the trailer is new, or the wheels are freshly mounted to the trailer, but even after the break in period.  A trailer’s lug nuts may loosen more frequently due to heavy loads, uneven load distribution, rough terrain and other factors.  The chart and the information below are derived from general industry practices but be sure to reference your manufacturers’ specifications.  Please contact one of our trailer experts with any questions.

When wheels are freshly mounted to a trailer, retorque your lug nuts:

  1. After the first 10 miles
  2. Again at 25 miles
  3. Again at 50 miles
  4. Check periodically

What is the RTA tax? Do I have to pay the Washington State RTA tax?2024-01-04T09:46:42-08:00
  • Regional Transit Authority (RTA) tax is a WA state mandated tax for specific residents of King, Pierce, and Snohomish counties that live within the Sound Transit District. You can check whether this tax applies to you by checking here.
  • RTA tax must be paid by residents in the Sound Transit District that purchase a new or used vehicle or trailer.
  • RTA tax is calculated as 1.1% of the purchase price of the vehicle or trailer.
  • Trailer Station USA is required by law to collect the RTA tax and submit 100% of the proceeds to the State of Washington. Trailer Station USA does not keep any of the RTA tax.
  • RTA tax is used to fund the construction and operation of Sound Transit’s mass transit services.
Torsion axles vs. Leaf spring axles. Which is better?2024-01-22T12:07:51-08:00

Fortunately, torsion axles and leaf spring axles are each well proven and durable.  Making a choice between the two is typically a matter of preference.

Leaf spring axles are well recognized; they use layers of steel springs (leaves) clamped together to provide suspension. Leaf spring axles are a more traditional and common type of axle.  A torsion axle conceals rubber cords to provide resistance to the suspension arm; the system is less noticeable.

General comparison:

In summary, a torsion axle offers a smoother ride and requires less maintenance but is more expensive and can be difficult to repair. A leaf spring axle, on the other hand, is more economical, easier to repair, and suitable for heavy loads, but may provide a rougher ride and require more maintenance. The choice depends on your specific needs, budget, and the typical loads and conditions the trailer will encounter.

What is trailer tongue weight?2024-01-20T08:59:18-08:00
What is trailer tongue weight?  How does trailer tongue weight affect driving performance?  How does trailer tongue weight influence GVWR and payload?
  • Tongue weight (TW) is the force of the trailer’s coupler onto the vehicle’s hitch. This is an important factor as it affects both the stability and the handling of the towing setup.
  • Tongue Weight and GVWR. Trailer manufacturers occasionally assign a portion of the trailer’s empty weight to the tongue of the vehicle to increase its GVWR rating while using the same axles.  For example, a trailer with a 10K axle might have an 11K GVWR (if 10% of the “weight” is assigned to the tongue).  This enables the user to legally tow a heavier payload assuming the tow vehicle can legally handle the extra weight, but the actual performance of the trailer has not changed.
  • Buyer beware. Recently, we found a manufacturer who applied tongue weight math, but the increased payload was greater than the dump’s lift capacity.
  • Distribution of Load. It is very important to ensure your load is distributed properly on your trailer.  If you don’t have enough weight on tongue, the vehicles rear tires can lose transaction; too much loaded tongue weight can reduce steering or braking, among other risks.  Pay attention to your tow vehicle’s and trailer’s specifications and recommendations.
  • There are many methods for measuring tongue weight and managing tongue height to maintain a level trailer such as adjustable height couplers, adjustable height tow balls, weight distribution hitches, and even vehicle air adjustable suspensions.
  • Generally, you want a level tow vehicle, a level trailer, and appropriate load distribution. Make sure your total setup is within legal requirements and equipment capabilities.  And don’t get hoodwinked by manufacturer claims.

As always, contact one of our trailer professionals for custom advice.

What are the best ramps for my dump trailer? What are the best ramps for my utility trailer or equipment trailer?2024-01-20T08:59:51-08:00

When choosing ramps for utility trailers, several factors need to be considered.  Below is a partial list so Contact Us one of our trailer specialists who can help you with the best solutions to your specific needs.

  1. Weight Capacity: The ramp must be able to support the maximum weight of the load it will carry (vehicle weight plus contents).  Most manufacturers rate their ramps with a static load at mid-span, but check your literature and always use caution.
  2. Material
    1. Steel ramps are the most common ramps due to their performance at low cost.  Steel ramps are typically heavy so consider the ramp storage system and your back strength.
    2. Aluminum ramps are lighter but typically more expensive than steel.  Highly engineered aluminum ramps have impressive weight to performance ratios.
    3. Mixed materials, for example on a cargo trailer rear door that acts as a ramp, are verry common.  For a rear ramp door, it is helpful to know the frame layout inside the door vs. your intended load points.
  3. Length and Width: The length of the ramp should be sufficient for the height of the trailer to ensure a gentle incline; steep ramps can be dangerous. The width should accommodate the width of the load, providing enough room for safe loading and unloading.  Good trailers will have a width adjusting system.
  4. Surface Traction: The ramp surface should provide good traction to prevent slips and falls. This is especially important in wet or dirty conditions. Look for ramps with a textured surface or traction coatings.
  5. Storage.  Consider how the ramps will be stored when not in use.
    1. Fold Up Ramps (or “Stand Up Ramps” or “Knee Ramps”) are fast and convenient to use.  Many are constructed to act as a full or partial stabilizing jack when lowered.  Most Fold Up Ramps are stored vertically which creates drag underway and they can also be noisy; minor issues if you usually tow a full load.
    2. Slide In Ramps.  These ramps are nicely hidden in pockets somewhere around the frame.  We prefer the rear slide in ramps so they are easy to deploy and return.  Some manufacturers put their ramp pockets in the front which requires a constant wrestling match.  No one likes to wrestle a steel ramp.
    3. Mega Ramps.  Are substantial – big and wide.  Manufacturers are very clever on the engineering of their spring assist up and down, minimizing the muscle required for any direction.  Watchers will think you are incredibly strong when you effortlessly move those ramps, so have fun with it.
  1. Is that a Beavertail? Or are you just glad to see me?  The beavertail is not technically part of the ramps – it is the last few feet of a cargo or flat deck equipment trailer that is angled towards the ramp/ground.  It lowers the deck height and improves the load angle – very popular for many applications.

It’s important to thoroughly assess your specific needs and conditions when choosing ramps for a utility trailer.  Our trailer experts are happy to help you with your specific needs so just give us a call.

What is Floor Gauge?2024-01-30T15:33:00-08:00
Dump Trailer Floor Gauge.  Yes, size matters.
  • Gauge thickness refers to a standard numerical scale used to measure the thickness of sheet metal. The gauge number is inversely related to the thickness of the metal: the lower the gauge number, the thicker the metal.
  • Generally, thicker metal will bend less and last longer. But thicker metal adds weight and decreases payload.  And more metal costs more money.  So be smart about what you really need.  Is your primary load topsoil or boulders?
  • And pay particular attention to the frame and sub frame. Sheet metal thickness needs the appropriate support underneath it so don’t just buy the “headline” gauge number.  What are the cross members?  Or are they bed runners?

As always, just Contact Us and one of our trailer experts and they will help you find a great solution.

Here is a table for Sheet Metal Gauge, thickness, and proxies:

Do I need to license my trailer?2024-01-04T08:48:48-08:00
  • Washington State residents are required to license their trailer for use on public roads. It is easiest for Trailer Station USA to license the trailer for you.
  • Oregon State residents might have to license their trailer depending on the trailer size and use. Please contact us for more details or review ODOT.
  • For out-of-state purchases, Trailer Station USA will mail the MSO (title) to you and you will be responsible for any licensing per your jurisdiction and local Department of Licensing.
Do you finance trailers?2024-01-04T08:49:10-08:00
  • We have a list of preferred lenders that we suggest you use. You can also use your own bank or lender.  Contact us directly if you need quotes or estimates for your own lender.  We do not finance buyers directly.
How long does it take to purchase a trailer?2024-01-04T08:49:30-08:00
  • As fast as you want! Email your documents beforehand and we can have the paperwork completed before you arrive.  Just make an appointment for your pickup window.
  • Want to browse first? If your documents and payment plans are ready, plan on 30 minutes of paperwork.
  • Need financing? Get preapproved through one of our preferred lenders?  Or contact us directly if you need quotes or estimates for your own lender.
What are the taxes and fees on a trailer purchase?2024-01-04T08:36:48-08:00
  • Taxes and license registration fees are complicated because they depend on 1) where you bought the trailer, 2) where or if you plan to register the trailer, and 3) the type or size of the trailer. The best way to estimate this burden is by requesting a free quote.  Simply choose a trailer of interest and click on the “Get Quote” button.
What is Washington State’s Documentation Service Fee? Why is the Documentation Service Fee negotiable?2024-01-04T08:49:53-08:00
  • Washington State allows a negotiable Documentation Service Fee, often known as “doc fees”, up to $200 to cover the costs of paperwork and other administrative functions. Smart dealerships will charge this fee because it is not taxable to the dealership or to the customer – the total cost of the purchase is lower since taxes are avoided by the customer and by the dealer.  Dealerships that don’t charge Documentation Service Fees either 1) like to pay taxes, 2) want to hide fees from the customer, or 3) just don’t understand taxes.
  • Do we like Doc Fees? Not really, because they are a weird tax concept and poorly understood.  But we also want to provide the best value to our customers and that includes smartly structuring transactions for tax efficiency.
What types of trailers do you carry?2024-01-04T08:50:22-08:00
Trailer Station USA can special order just about any type of trailer but carries a variety of trailers in stock, such as:
  1. Cargo
  2. Utility
  3. Dump
  4. Gooseneck
  5. Car Hauler
  6. ATV
  7. Equipment
  8. Tilt
  9. Used
What trailer brands do you carry?2024-01-04T08:50:48-08:00
We proudly represent these quality trailer brands:
  1. Iron Bull
  2. Southland
  3. Royal Cargo
  4. Dura Haul
  5. Big Tex
  6. Summit
  7. Carry-On
  8. Criterion
  9. Eagle
  10. Teton